Showing 18–34 of 100 results

1260 Infinity III Diode Array Detector WR (G7115A)

The 1260 Infinity III Diode Array Detector WR offers multiple wavelength and full spectral detection up to a 120 Hz sampling rate. Maximum flexibility is guaranteed with a wide wavelength range of 190 to 950 nm with dual-lamp design, as well as the choice of 15 analytical, preparative, and SFC flow cells. Even at high data rates, the 1260 Infinity III DAD WR enables precise identification, quantification, and peak purity analysis at trace levels.

1260 Infinity III Evaporative Light Scattering Detector (G4260B)

The 1260 Infinity III Evaporative Light Scattering Detector (ELSD), although targeted at analytical scale, can also be used with a flow splitter for preparative chromatography applications. It is highly recommended for compounds with little or no UV chromophore, since the detector technique evaporates the solvent and then measures the intensity of the scattered light, which is directly proportional to the sample concentration. There is no need to make any corrections for composition: the response is independent of any optical properties. Whatever temperature and gas flow rate is selected, the detector rapidly stabilizes and can be used within minutes. There is no baseline drift to consider, baseline integration is straightforward, and reproducibility is excellent. The detector can be programmed and controlled by many available LC software packages.

1260 Infinity III Flexible Pump (G7104C)

The 1260 Infinity III Flexible Pump is a quaternary UHPLC pump that provides gradient formation and solvent blending from up to four solvents. This UHPLC pump enables quaternary solvent delivery at pressures up to 800 bar and flow rates up to 5 mL/min. The 1260 Infinity III Flexible Pump combines high performance and simplified operation with highest flexibility in automated gradient formation and solvent blending. This UHPLC pump also facilitates seamless method transfer using ISET and automated buffer blending.

1260 Infinity III Hybrid Multisampler (G7167C)

The 1260 Infinity III Hybrid Multisampler is an HPLC autosampler that offers both classical flow-through injection and Agilent Feed Injection modes. In classical flow-through mode, the mobile phase delivered by the HPLC pump flows through the loaded sample loop. In Feed Injection mode, sample is infused continuously into the mobile phase stream. For samples with strong solvent, for example after QuEChERS sample preparation in food analysis, sample solvent effect is a challenge that leads to peak break through and poor peak shapes, especially as injection volumes increase. Agilent Feed Injection can mediate the strong sample solvent effect by mixing sample and mobile phase directly at injection to improve peak shapes and sensitivity. By applying Feed Injection mode, there is no need for extra sample preparation, and the perfect peak shapes enable easy peak integration.

1260 Infinity III Isocratic Pump (G7110B)

The 1260 Infinity III Isocratic Pump provides isocratic solvent management for HPLC, UHPLC, and GPC/SEC applications. This pump operates at pressures up to 600 bar and flow rates up to 10 mL/min. The 1260 Infinity III Isocratic Pump is the ideal workhorse for demanding QA/QC tasks and routine applications that require maximum uptime at low operating and maintenance cost. This pump is ideal for GPC/SEC applications where run-to-run and day-to-day precision of retention times is crucial.

1260 Infinity III Multicolumn Thermostat (G7116A)

The 1260 Infinity III Multicolumn Thermostat (MCT) is a thermostatted HPLC column compartment that provides precise temperature control for up to four columns over a broad temperature range with cooling to 10 degrees below ambient and heating up to 85 °C. High-pressure valves rated at 800 bar enable a wide range of applications such as automatic selection of up to four columns, sample preparation for analyte enrichment or matrix removal, or alternating column regeneration. The 1260 Infinity III MCT fits perfectly in any InfinityLab LC Series system and can also be combined with earlier 1260 and 1290 Infinity Series modules.

1260 Infinity III Multiple Wavelength Detector (G7165A)

The diode array design of the 1260 Infinity III Multiple Wavelength Detector offers very low detector noise (less than ±7 μAU) for precise quantification of trace levels, regardless of the number of signals recorded. Over a wavelength range from 190 to 950 nm, simultaneous detection of up to eight compound-specific wavelengths for optimum selectivity is provided. High-speed UV detection with up to 120 Hz data rates keeps pace with the analysis speed of fast LC.

1260 Infinity III Online Sample Manager (G3167A)

The 1260 Infinity III Online Sample Manager is an online sampling module that connects the analytical world with the process world. The module provides automated sample analysis via direct injections or retained samples from flow reactors, batch reactors, as well as upstream bioreactors and downstream purification devices. The Online Sample Manager supports both classical flow-through injection and Agilent Feed Injection, mediating the chromatographic sample diluent incompatibility of challenging process samples. The Online Sample Manager provides automated dilutions of up to 1:1000, retain-sample functionality, and direct analysis of the process samples, as well as automated sample preparation.

1260 Infinity III Quaternary Pump (G7111B)

The 1260 Infinity III Quaternary Pump is a gradient pump that uses low-pressure mixing for UHPLC gradient formation and solvent blending from up to four solvents. This pump operates at pressures up to 600 bar and flow rates up to 10 mL/min. The 1260 Infinity III Quaternary Pump combines proven reliability with highest flexibility in automated gradient formation and solvent blending, and is recommended for a wide range of research and routine applications as well as for method development.

1260 Infinity III Quaternary Pump VL (G7111A)

The 1260 Infinity III Quaternary Pump is a gradient pump that uses low-pressure mixing for UHPLC gradient formation and solvent blending from up to four solvents. This pump operates at pressures up to 600 bar and flow rates up to 10 mL/min. The 1260 Infinity III Quaternary Pump combines proven reliability with highest flexibility in automated gradient formation and solvent blending, and is recommended for a wide range of research and routine applications as well as for method development.

1260 Infinity III Refractive Index Detector (G7162A)

The 1260 Infinity III RID is an HPLC refractive index detector (RID) detector that provides excellent performance for entry-level UHPLC and HPLC differential refractometer (DRI) experiments. Rapid equilibration times and stable baselines make it easy to analyze carbohydrates, triglycerides, organic acids, and pharmaceutical excipients. The 1260 Infinity III RID is the detector of choice for polymer characterization using gel permeation chromatography (GPC) and size exclusion chromatography (SEC).

1260 Infinity III SFC Multisampler (G4767A)

The 1260 Infinity III SFC Multisampler is a high-capacity autosampler for supercritical fluid chromatography, bringing LC-like injection precision and reproducibility to SFC. The wide injection range supports flexible injection volumes from 0.1 to 90 µL without changing sample loops. The 1260 Infinity III SFC Multisampler is compatible with 2 mL vials and well plates for fast, high-throughput (up to 6,144 samples) SFC and SFC/MS applications. Innovative Feed Injection technology pressurizes the sample prior to injection into the carbon dioxide (CO2) stream for utmost injection precision and reproducibility.

1260 Infinity III SFC Binary Pump (G4782A)

The 1260 Infinity III SFC Binary Pump is a supercritical fluid chromatography (SFC) pump that supports high-pressure gradient formation and precise mobile phase delivery up to 5 mL/min and 600 bar. It can be used with a broad range of chiral and achiral columns, and ideal for fast, high-throughput SFC and SFC/MS applications. The 1260 Infinity III SFC Binary Pump is equipped with special pistons and seals for utmost robustness under SFC conditions. Carbon dioxide (CO2) is delivered through channel A while organic modifier can be added through channel B for either isocratic or gradient elution. Channel B is fitted with a purge valve to facilitate rapid change of organic modifier.

1260 Infinity III SFC Control Module (G4301A)

The 1260 Infinity III SFC Control Module is a carbon dioxide conditioning unit for supercritical fluid chromatography. This module pre- and postconditions CO2 for InfinityLab SFC solutions. CO2 preconditioning provides for unmatched stability and precision of retention times, and postconditioning enables trouble-free connection to mass spectrometers. The 1260 Infinity III SFC Control Module first liquefies gas-phase CO2 and then compresses the liquefied gas. This unique approach of precompression eliminates many of the problems caused by the thermodynamic properties of liquid-phase CO2, and enables precise composition and delivery of the mobile phase by the 1260 Infinity III SFC Binary Pump at pressures up to 600 bar.

1260 Infinity III Variable Wavelength Detector (G7114A)

The 1260 Infinity III Variable Wavelength Detector enables highest productivity with fast analysis at up to 120 Hz data rates. Even more sample information can be acquired in dual-wavelength mode. Time-programmable wavelength switching provides optimum sensitivity and selectivity for your applications. Lowest baseline noise and drift results in lowest detection limits for robust quantification of trace level components.

1260 Infinity III Vialsampler (G7129C)

The 1260 Infinity III Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C. An integrated column compartment is also available as an option or upgrade and provides thermal control to 80 °C for two columns.