Showing 35–51 of 594 results

12113035 Bond Elut Diol (2OH) cartridge, LRC, 500 mg, 10 mL, 50

Bond Elut Diol (2OH) cartridge, LRC, 500 mg, 10 mL, 50.box. Resembles unbonded silica in its tendency for strong hydrogen bonding with analytes. Bond Elut Diol can also be employed in a nonpolar mode for retention of hydrophobic analytes.

12113040 Bond Elut NH2 cartridge

Bond Elut NH2 cartridge, LRC, 500 mg, 10 mL, 40 μm, 50/pk. A weak anion exchanger for retention of very strong anions. Similar to Bond Elut Diol and SI sorbents, Bond Elut NH2 cartridges are excellent for the separation of structural isomers.

12256023 Mega Bond Elut Flash cartridge

Mega Bond Elut Flash cartridge, C18, 5 g, 20 mL, 20/pk. The most hydrophobic, bonded silica sorbent in the Bond Elut range. Regarded as having the broadest spectrum of retention among bonded silica sorbents. In a scaled-up SPE cartridge.

12256024 Bond Elut C8 cartridge, 5 g, 20 mL, 40 µm, 20/pk

Bond Elut C8 cartridge, 5 g, 20 mL, 40 µm, 20/pk. Has very similar properties to C18 but is not as retentive for nonpolar compounds due to its shorter hydrocarbon chain. C8 is an excellent replacement for C18 when analytes are too strongly retained.

12256026 Mega Bond Elut Flash cartridge

Mega Bond Elut Flash cartridge, SI, 5 g, 20 mL, 20/pk. Bond Elut SI is a very polar sorbent and is particularly effective at separating compounds with a very similar structure. In a scaled-up SPE cartridge.

12256029 Bond Elut SAX SPE Cartridge, 5 g, 20 mL, 40 μm, 20/pk

A strong anion exchange sorbent ideally suited for the extraction of compounds, such as carboxylic acids, which may not retain effectively on weak anion exchange sorbents.

12256145 Bond Elut Certify cartridge, 200 mg, 6 mL, 40 μm, 30/pk

Bond Elut Certify cartridge, 200 mg, 6 mL, 40 μm, 30/pk. Mixed mode sorbent with nonpolar C8 and strong cation exchange (SCX) functionalities. Effective for the extraction of basic drugs from urine and blood.

125-7037 J&W DB-WAX GC Column

J&W DB-WAX GC Column, 30 m, 0.53 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non-Agilent GC systems with a similarly sized oven.

1260 Infinity II Analytical Fraction Collector (G1364F)

The 1260 Infinity II Analytical-Scale Fraction Collector is optimized for laboratories performing analytical-scale compound purification of nanogram to milligram quantities with typical flow rates between 0.1 and 10 mL/min. The module features the full set of collection modes and is compatible with a wide variety of trigger sources. SBS plates and four different tube sizes with various lenghts are supported. The Analytical-Scale Fraction Collector features a compact closed-box design, requires minimal bench space, and can be seamlessly integrated into any InfinityLab Analytical System. The built-in fraction delay sensor allows automated delay calibration for maximum substance recovery, and the four preconfigured capillary kits ensure minimum peak dispersion for maximum purity. Maximum capacity can be easily enhanced by clustering up to three modules.

1260 Infinity II Analytical-Scale LC Purification System

Agilent offers high- and ultrahigh-performance LC systems customized for applications from routine analysis to specialized workflow solutions. Our preparative HPLC systems provide superior sample purification with excellent recovery.  

1260 Infinity II Bio-inert Fraction Collector (G5664B)

The 1260 Infinity II Bio-Inert Fraction Collector is the ideal extension to your system when you need to further investigate separated compounds. A wide range of collection vessels, including vials, microplates, or custom vessels, provide highest collection flexibility. Handling flow rates up to 10 mL/min, even separations using columns with larger inside diameters for small-scale preparative applications are possible. This fraction collector fits perfectly into the Agilent modular LC design and does not require extra bench space. Patented fraction delay calibration and time- or peak-triggered fraction collection facilitates superior recovery and purity. An additional cooling module is available to prevent degradation of thermally labile biomolecules.
For Research Use Only. Not for use in diagnostic procedures.

1260 Infinity II Column Organizer (G9328A)

The 1260 Infinity II Preparative Column Organizer is a support module for purification workflows. It provides convenient and stable mounting of a manual injector and easily organizes both analytical and preparative columns from 4.6 to 50 mm inner diameter. This compact module can be easily attached to any InfinityLab LC Purification System, saving valuable bench space in your laboratory. It provides a leak sensor for additional safety during operation and is flexibly designed to support any purification workflow with column lengths from 50 to 250 mm.

1260 Infinity II Prep Autosampler (G7157A)

GLP features. Early maintenance feedback (EMF) for continuous tracking of instrument usage with user-settable limits and feedback messages. Electronic records of maintenance and errors.

1260 Infinity II Preparative Binary Pump (G7161A)

The 1260 Infinity II Preparative Binary Pump is an affordable high-pressure gradient pump for LC purification. The pump offers a dynamic flow rate range from 1 to 50 mL/min at up to 420 bar, allowing workflows on columns from 9.4 to 30 mm inner diameter. This versatile pump is engineered for continuous use and provides reliable and rugged performance through a dual-piston, rapid-refill design. It offers automated seal wash for increased seal lifetime plus outstanding retention time stability, and is ideally suited for daily operation within a broad range of semipreparative applications.

1260 Infinity II Preparative Fraction Collector (G1364E)

The 1260 Infinity II Preparative Fraction Collector is optimized for laboratories performing semipreparative-scale purification of milligram to low gram quantities with typical flow rates between 4 and 100 mL/min. The module features the full set of collection modes and is compatible with a wide variety of trigger sources. SBS plates and four different tube sizes with various lengths are supported. The Preparative-Scale Fraction Collector features a compact closed-box design, requires minimal bench space, and can be seamlessly integrated into any InfinityLab Purification System. The built-in fraction delay sensor allows automated delay calibration for maximum substance recovery, and the four preconfigured capillary kits ensure minimum peak dispersion for maximum purity. Maximum capacity can be easily enhanced by clustering up to three modules.

1260 Infinity II Valve-Based Fraction Collector (G7166A)

The 1260 Infinity II Preparative Valve-Based Fraction Collector is a compact, full-featured fraction collector for daily compound isolation and purification by LC. Optimized for collection of up to 11 high-volume fractions its versatile design allows operation in both routine sample purification workflows and recovery applications. The built-in fraction delay sensor allows precise and automatic calibration of the fraction collector for accurate sample collection. This fraction collector accepts multiple detectors as trigger sources and includes all standard collection modes like time-based and peak-based. It can be used on any InfinityLab Purification System and its small dimensions occupy virtually no additonal space on the instrument. Blow-outs of nitrogen or compressed air purge the outlet lines after completed collection and help minimize carryover.

1260 Infinity III Fluorescence Detector (G7121A)

The 1260 Infinity III Fluorescence Detector offers time-programmable excitation and emission wavelength switching. The proven optical and electronic design provides the highest sensitivity for the analysis of trace-level components. This detector can be used with any Agilent InfinityLab LC Series system or other LC instrument. Benefit from highest sensitivity for the analysis of trace-level components featuring high-speed detection with up to 74 Hz data rates for narrow LC peaks.