Showing 52–68 of 594 results

1260 Infinity III Fluorescence Detector Spectra (G7121B)

The 1260 Infinity III Fluorescence Detector Spectra is a sensitive HPLC fluorescence detector that simultaneously provides quantitative data and fluorescence spectra from a single run, enabling rapid method optimization for HPLC FLD Detector Spectra experiments. Use the online spectral information for rapid method optimization and verification of separation quality. High-speed detection features up to 148 Hz data rates for very narrow peaks. This detector can be used with any Agilent InfinityLab LC Series system or other LC instrument.

1260 Infinity III Multisampler (G7167A)

The 1260 Infinity III Multisampler is a multipurpose autosampler that handles vials and microplates. Injecting at pressures up to 600 or 800 bar, the Multisampler is a compact module with a capacity of up to 6,144 samples, all within the footprint of an Agilent LC stack. The 1260 Infinity III Multisampler is optimized for highest flexibility. The unique dual-needle design enables cycle times to be reduced by overlapping sample runs and injection cycles. The multiwash capability reduces carryover to less than 9 ppm.

1260 Infinity III Binary Pump (G7112B)

The 1260 Infinity III Binary Pump uses high-pressure mixing for UHPLC gradient formation and solvent blending from one or two solvents at pressures up to 600 bar and flow rates up to 5 mL/min. The 1260 Infinity III Binary Pump is ideally suited for a broad range of UHPLC applications using columns with conventional, superficially porous or sub-2-micron particles. This pump delivers reproducible gradients for routine HPLC or UHPLC applications with UV or MS detection where speed, resolution, and uncompromised data quality are essential.

1260 Infinity III Bio Flexible Pump (G7131C)

The 1260 Infinity III Bio Flexible Pump is a UHPLC pump comprising biocompatible components, developed for biopharma applications and for other analyses requiring high-salt and extreme-pH conditions. This pump enables quaternary solvent delivery at pressures up to 800 bar and flow rates up to 5 mL/min. The 1260 Infinity III Bio Flexible Pump combines high performance and simplified operation with remarkable flexibility in automated gradient formation and solvent blending. This pump also facilitates seamless method transfer using Intelligent System Emulation Technology (ISET) and automated buffer blending.
 

1260 Infinity III Bio-Inert Multisampler (G5668A)

The 1260 Infinity III Bio-Inert Multisampler injects samples from microplate and vial at pressures up to 600 bar. It is a compact module offering a capacity of up to 6,144 samples. With its multiwash capability, you can reduce carryover to less than 9 ppm. The metal-free sample flow path makes it the ideal injector for all biorelated applications, including analysis of mAbs, proteins in general, and oligonucleotides. For temperature-sensitive samples, a highly efficient compressor-based thermostatting system can be added. The ceramic needle, PEEK needle seat, and stainless steel-clad PEEK capillaries ensure highest injection accuracy and precision.

1260 Infinity III Bio-Inert Pump (G5654A)

The 1260 Infinity III Bio-Inert Pump is a quaternary UHPLC pump that is made of bio-inert material for use in biological and extreme pH applications. This pump enables gradient formation and solvent blending from up to four solvents and operates at pressures up to 600 bar and flow rates up to 10 mL/min. The 1260 Infinity III Bio-Inert Pump is resistant to corrosion by high salt concentrations (2 M) and can handle a wide pH range from 1–13, and even up to pH 14 for short-term use. This pump is ideal for protein and NBE characterization.

1260 Infinity III Diode Array Detector HS (G7117C)

The 1260 Infinity III Diode Array Detector HS, with a fixed slit design, is based on the Agilent Max-Light Cartridge Cell with optofluidic waveguides, which improve light transmission to near 100% efficiency without sacrificing resolution caused by cell dispersion effects. With typical detector noise levels of less than ±0.6 µAU/cm, the 60 mm flow cell gives up to 10 times higher sensitivity than detectors with conventional flow cells. Any compromising refractive index and thermal effects are eliminated, resulting in significantly less baseline drift for more reliable and precise peak integration. Multiple wavelength and full spectral detection with up to 120 Hz data rates enable precise identification, quantification, and purity analysis at trace levels for fast LC separations.

1260 Infinity III Diode Array Detector WR (G7115A)

The 1260 Infinity III Diode Array Detector WR offers multiple wavelength and full spectral detection up to a 120 Hz sampling rate. Maximum flexibility is guaranteed with a wide wavelength range of 190 to 950 nm with dual-lamp design, as well as the choice of 15 analytical, preparative, and SFC flow cells. Even at high data rates, the 1260 Infinity III DAD WR enables precise identification, quantification, and peak purity analysis at trace levels.

1260 Infinity III Evaporative Light Scattering Detector (G4260B)

The 1260 Infinity III Evaporative Light Scattering Detector (ELSD), although targeted at analytical scale, can also be used with a flow splitter for preparative chromatography applications. It is highly recommended for compounds with little or no UV chromophore, since the detector technique evaporates the solvent and then measures the intensity of the scattered light, which is directly proportional to the sample concentration. There is no need to make any corrections for composition: the response is independent of any optical properties. Whatever temperature and gas flow rate is selected, the detector rapidly stabilizes and can be used within minutes. There is no baseline drift to consider, baseline integration is straightforward, and reproducibility is excellent. The detector can be programmed and controlled by many available LC software packages.

1260 Infinity III Flexible Pump (G7104C)

The 1260 Infinity III Flexible Pump is a quaternary UHPLC pump that provides gradient formation and solvent blending from up to four solvents. This UHPLC pump enables quaternary solvent delivery at pressures up to 800 bar and flow rates up to 5 mL/min. The 1260 Infinity III Flexible Pump combines high performance and simplified operation with highest flexibility in automated gradient formation and solvent blending. This UHPLC pump also facilitates seamless method transfer using ISET and automated buffer blending.

1260 Infinity III Hybrid Multisampler (G7167C)

The 1260 Infinity III Hybrid Multisampler is an HPLC autosampler that offers both classical flow-through injection and Agilent Feed Injection modes. In classical flow-through mode, the mobile phase delivered by the HPLC pump flows through the loaded sample loop. In Feed Injection mode, sample is infused continuously into the mobile phase stream. For samples with strong solvent, for example after QuEChERS sample preparation in food analysis, sample solvent effect is a challenge that leads to peak break through and poor peak shapes, especially as injection volumes increase. Agilent Feed Injection can mediate the strong sample solvent effect by mixing sample and mobile phase directly at injection to improve peak shapes and sensitivity. By applying Feed Injection mode, there is no need for extra sample preparation, and the perfect peak shapes enable easy peak integration.

1260 Infinity III Isocratic Pump (G7110B)

The 1260 Infinity III Isocratic Pump provides isocratic solvent management for HPLC, UHPLC, and GPC/SEC applications. This pump operates at pressures up to 600 bar and flow rates up to 10 mL/min. The 1260 Infinity III Isocratic Pump is the ideal workhorse for demanding QA/QC tasks and routine applications that require maximum uptime at low operating and maintenance cost. This pump is ideal for GPC/SEC applications where run-to-run and day-to-day precision of retention times is crucial.

1260 Infinity III Multicolumn Thermostat (G7116A)

The 1260 Infinity III Multicolumn Thermostat (MCT) is a thermostatted HPLC column compartment that provides precise temperature control for up to four columns over a broad temperature range with cooling to 10 degrees below ambient and heating up to 85 °C. High-pressure valves rated at 800 bar enable a wide range of applications such as automatic selection of up to four columns, sample preparation for analyte enrichment or matrix removal, or alternating column regeneration. The 1260 Infinity III MCT fits perfectly in any InfinityLab LC Series system and can also be combined with earlier 1260 and 1290 Infinity Series modules.

1260 Infinity III Multiple Wavelength Detector (G7165A)

The diode array design of the 1260 Infinity III Multiple Wavelength Detector offers very low detector noise (less than ±7 μAU) for precise quantification of trace levels, regardless of the number of signals recorded. Over a wavelength range from 190 to 950 nm, simultaneous detection of up to eight compound-specific wavelengths for optimum selectivity is provided. High-speed UV detection with up to 120 Hz data rates keeps pace with the analysis speed of fast LC.

1260 Infinity III Online Sample Manager (G3167A)

The 1260 Infinity III Online Sample Manager is an online sampling module that connects the analytical world with the process world. The module provides automated sample analysis via direct injections or retained samples from flow reactors, batch reactors, as well as upstream bioreactors and downstream purification devices. The Online Sample Manager supports both classical flow-through injection and Agilent Feed Injection, mediating the chromatographic sample diluent incompatibility of challenging process samples. The Online Sample Manager provides automated dilutions of up to 1:1000, retain-sample functionality, and direct analysis of the process samples, as well as automated sample preparation.

1260 Infinity III Quaternary Pump (G7111B)

The 1260 Infinity III Quaternary Pump is a gradient pump that uses low-pressure mixing for UHPLC gradient formation and solvent blending from up to four solvents. This pump operates at pressures up to 600 bar and flow rates up to 10 mL/min. The 1260 Infinity III Quaternary Pump combines proven reliability with highest flexibility in automated gradient formation and solvent blending, and is recommended for a wide range of research and routine applications as well as for method development.