Showing 69–85 of 594 results

1260 Infinity III Quaternary Pump VL (G7111A)

The 1260 Infinity III Quaternary Pump is a gradient pump that uses low-pressure mixing for UHPLC gradient formation and solvent blending from up to four solvents. This pump operates at pressures up to 600 bar and flow rates up to 10 mL/min. The 1260 Infinity III Quaternary Pump combines proven reliability with highest flexibility in automated gradient formation and solvent blending, and is recommended for a wide range of research and routine applications as well as for method development.

1260 Infinity III Refractive Index Detector (G7162A)

The 1260 Infinity III RID is an HPLC refractive index detector (RID) detector that provides excellent performance for entry-level UHPLC and HPLC differential refractometer (DRI) experiments. Rapid equilibration times and stable baselines make it easy to analyze carbohydrates, triglycerides, organic acids, and pharmaceutical excipients. The 1260 Infinity III RID is the detector of choice for polymer characterization using gel permeation chromatography (GPC) and size exclusion chromatography (SEC).

1260 Infinity III SFC Multisampler (G4767A)

The 1260 Infinity III SFC Multisampler is a high-capacity autosampler for supercritical fluid chromatography, bringing LC-like injection precision and reproducibility to SFC. The wide injection range supports flexible injection volumes from 0.1 to 90 µL without changing sample loops. The 1260 Infinity III SFC Multisampler is compatible with 2 mL vials and well plates for fast, high-throughput (up to 6,144 samples) SFC and SFC/MS applications. Innovative Feed Injection technology pressurizes the sample prior to injection into the carbon dioxide (CO2) stream for utmost injection precision and reproducibility.

1260 Infinity III SFC Binary Pump (G4782A)

The 1260 Infinity III SFC Binary Pump is a supercritical fluid chromatography (SFC) pump that supports high-pressure gradient formation and precise mobile phase delivery up to 5 mL/min and 600 bar. It can be used with a broad range of chiral and achiral columns, and ideal for fast, high-throughput SFC and SFC/MS applications. The 1260 Infinity III SFC Binary Pump is equipped with special pistons and seals for utmost robustness under SFC conditions. Carbon dioxide (CO2) is delivered through channel A while organic modifier can be added through channel B for either isocratic or gradient elution. Channel B is fitted with a purge valve to facilitate rapid change of organic modifier.

1260 Infinity III SFC Control Module (G4301A)

The 1260 Infinity III SFC Control Module is a carbon dioxide conditioning unit for supercritical fluid chromatography. This module pre- and postconditions CO2 for InfinityLab SFC solutions. CO2 preconditioning provides for unmatched stability and precision of retention times, and postconditioning enables trouble-free connection to mass spectrometers. The 1260 Infinity III SFC Control Module first liquefies gas-phase CO2 and then compresses the liquefied gas. This unique approach of precompression eliminates many of the problems caused by the thermodynamic properties of liquid-phase CO2, and enables precise composition and delivery of the mobile phase by the 1260 Infinity III SFC Binary Pump at pressures up to 600 bar.

1260 Infinity III Variable Wavelength Detector (G7114A)

The 1260 Infinity III Variable Wavelength Detector enables highest productivity with fast analysis at up to 120 Hz data rates. Even more sample information can be acquired in dual-wavelength mode. Time-programmable wavelength switching provides optimum sensitivity and selectivity for your applications. Lowest baseline noise and drift results in lowest detection limits for robust quantification of trace level components.

1260 Infinity III Vialsampler (G7129C)

The 1260 Infinity III Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C. An integrated column compartment is also available as an option or upgrade and provides thermal control to 80 °C for two columns.

1290 Infinity II MS Flow Modulator (G7170B)

The 1290 Infinity II MS Flow Modulator is an active flow splitter for mass-based purification workflows. The module facilitates efficient solvent transfer of tiny aliquots and is suitable for flow rates up to 200 mL/min, providing split ratios between 100:1 and 100,000:1 with split frequencies up to 2 Hz. The MS Flow Modulator seamlessly integrates into any InfinityLab LC Purification System. Simply upgrade any InfinityLab LC Purification System with this compact module and unlock the selectivity of mass-based fraction triggering for your everyday purification workflow. The unique mode of operation is based on the proven InfinityLab Quick Change Valve technology and provides a constant split ratio over the whole purification run independent of viscosity changes.

1290 Infinity II Preparative Binary Pump (G7161B)

The 1290 Infinity II Preparative Binary Pump features easy-to-change pump heads and high-pressure mixing, delivering flow rates from 1 to 200 mL/min at up to 600 bar. Seamless scale-up across a broad range of applications is possible with column ids from 4.6 to 50.0 mm. The pump is the solvent delivery module of choice for achieving high-quality HPLC separations in your analytical and preparative-scale purification workflows. This versatile pump is an upgraded version of the 1260 Infinity II Preparative Binary Pump, engineered for maximum flexibility and ready for any purification challenge. The built-in solvent selection valve expands the application range and allows switching between two different solvents per channel. Automated seal-wash and dual-piston rapid-refill design provide outstanding chromatographic performance for everyday use.

1290 Infinity II Preparative Column Compartment (G7163B)

The 1290 Infinity II Preparative Column Compartment is a high-end support module for purification workflows. It provides sufficient capacity to store up to four analytical and six preparative columns supporting dimensions from 4.6 to 50 mm inner diameter and 50 to 250 mm length. Five multipurpose slots are available for mounting of valves, delay coils, and further auxiliary purification modules. This module can be easily integrated into any InfinityLab LC Purification System, and the flexible interior design allows easy setup for any purification workflow. Its closed design and built-in leak sensor provide additional safety for the operator by keeping solvent spills behind closed doors. An exhaust connector for venting helps keeping harmful vapors at a minimum.

1290 Infinity II Preparative Open-Bed Fraction Collector (G7159B)

The 1290 Infinity II Preparative Open-Bed Fraction Collector is our most versatile fraction collector, enabling high-capacity fraction collection of purified compounds for semipreparative and preparative-scale LC purification. This module is ideally suited to open-access environments, provides all standard trigger modes for purification workflows, and is optimized for flow rates up to 200 mL/min. The Open-Bed Fraction Collector can be seamlessly integrated into any InfinityLab Purification System. The integrated fraction delay sensor allows automated delay calibration for maximum substance recovery. The module uses RFID tagging for automated and rapid detection of vessel dimensions. The fast X-Z-theta probe minimizes sample loss during movement between vessels.

1290 Infinity II Preparative Open-Bed Sampler/Collector (G7158B)

The 1290 Infinity II Preparative Open-Bed Sampler/Collector is the solution for automated, high-capacity management of sample injection and fraction collection in semipreparative and preparative-scale LC purification workflows. The X-Z-theta axis probe uses novel robotic technology to minimize sample carryover during movements between fraction containers. Sample volumes can be injected from microtiter plates, vials, or vessels. The sampler/collector provides for injection of large volumes and sample loops are available with volumes of 2, 5, 10, 20 and 90 mL. The sampler/collector is equipped with an analytical-to-preparative injector and enables easy handling of a wide variety of collection vessels with a total capacity up to 5.9 liters using 150 x 25 mm (l x od) tubes. Optimized for flow rates up to 200 mL/min, the sampler/collector can be integrated seamlessly with any Agilent solvent delivery module, additional fraction collector, recovery collector, or detector.

1290 Infinity III Multisampler (G7167B)

The 1290 Infinity III Multisampler is a multipurpose autosampler that handles vials and microplates. Injecting at pressures up to 1300 bar, the Multisampler is a compact module with a capacity of up to 6,144 samples, all within the footprint of an Agilent LC stack. The 1290 Infinity III Multisampler is optimized for highest chromatographic performance. The unique dual-needle design enables cycle times to be reduced using overlapped sample runs and injection cycles. The multiwash capability reduces carryover to less than 9 ppm.

1290 Infinity III Bio Multisampler (G7137A)

The 1290 Infinity III Bio Multisampler, with its biocompatible sample flow path, is perfectly suited for biomolecule analysis, ensuring integrity of biomolecules and minimizing unwanted surface interaction. For temperature-sensitive samples, a compressor-based thermostatting device can be added. Injecting at pressures up to 1300 bar, the Bio Multisampler is a compact module with a capacity of up to 6,144 samples, all within the footprint of an Agilent LC stack. It is a multipurpose autosampler that handles vials and microplates, and is optimized for highest chromatographic performance.

1290 Infinity III Bio Flexible Pump (G7131A)

The 1290 Infinity III Bio Flexible Pump is a UHPLC pump consisting of biocompatible material, designed for use in biopharma and other applications utilizing high-salt and extreme-pH conditions. It offers gradient formation from up to four solvents at pressures up to 1300 bar and flow rates up to 5 mL/min. The 1290 Infinity III Bio Flexible Pump combines exceptional performance, method compatibility, and simplified operation with outstanding flexibility in automated gradient formation and solvent blending. Intelligent System Emulation Technology (ISET) allows you to seamlessly transfer existing methods from different instruments.

1290 Infinity III Bio High Speed Pump (G7132A)

The 1290 Infinity III Bio High-Speed Pump is a binary UHPLC pump consisting of biocompatible material for use in biopharma and other applications utilizing high salt and extreme pH conditions. It uses high-pressure blending from up to two solvents at pressures up to 1300 bar and flow rates up to 5 mL/min. This Bio High-Speed Pump has an exceptionally low delay volume, achieving high throughput and highest resolution for the most demanding applications, giving you highest confidence in your results. It is the ideal front end for LC/MS applications.