Showing 86–102 of 594 results

1290 Infinity III Multicolumn Thermostat (G7116B)

The 1290 Infinity III Multicolumn Thermostat (MCT) is a UHPLC column oven that provides precise temperature control over a broad temperature range with cooling to 20 degrees below ambient and heating up to 110 °C. The MCT's column compartment houses up to eight columns. High-pressure valves rated at 1300 bar enable a wide range of applications such as automatic selection from eight columns, sample preparation for analyte enrichment or matrix removal, or alternating column regeneration. The 1290 Infinity III MCT fits perfectly in any InfinityLab LC Series system and can also be combined with earlier 1260 and 1290 Infinity Series modules.

1260 Infinity III Evaporative Light Scattering Detector (G4260B)

The 1260 Infinity III Evaporative Light Scattering Detector (ELSD), although targeted at analytical scale, can also be used with a flow splitter for preparative chromatography applications. It is highly recommended for compounds with little or no UV chromophore, since the detector technique evaporates the solvent and then measures the intensity of the scattered light, which is directly proportional to the sample concentration. There is no need to make any corrections for composition: the response is independent of any optical properties. Whatever temperature and gas flow rate is selected, the detector rapidly stabilizes and can be used within minutes. There is no baseline drift to consider, baseline integration is straightforward, and reproducibility is excellent. The detector can be programmed and controlled by many available LC software packages.

1260 Infinity III Refractive Index Detector (G7162A)

The 1260 Infinity III RID is an HPLC refractive index detector (RID) detector that provides excellent performance for entry-level UHPLC and HPLC differential refractometer (DRI) experiments. Rapid equilibration times and stable baselines make it easy to analyze carbohydrates, triglycerides, organic acids, and pharmaceutical excipients. The 1260 Infinity III RID is the detector of choice for polymer characterization using gel permeation chromatography (GPC) and size exclusion chromatography (SEC).

1290 Infinity III Refractive Index Detector (G7162B)

The 1290 Infinity III Refractive Index Detector (RID) is a UHPLC RID detector that provides excellent sensitivity, resolution, and sample throughput for UHPLC DRI experiments. The 1290 Infinity III RID is a equipped with an ultralow dispersion microflow cell and a data rate of 148 Hz, which significantly reduces run times for higher sample throughput and improved resolution and sensitivity.

1260 Infinity III Fluorescence Detector Spectra (G7121B)

The 1260 Infinity III Fluorescence Detector Spectra is a sensitive HPLC fluorescence detector that simultaneously provides quantitative data and fluorescence spectra from a single run, enabling rapid method optimization for HPLC FLD Detector Spectra experiments. Use the online spectral information for rapid method optimization and verification of separation quality. High-speed detection features up to 148 Hz data rates for very narrow peaks. This detector can be used with any Agilent InfinityLab LC Series system or other LC instrument.

1290 Infinity III Evaporative Light Scattering Detector (G7102A)

The 1290 Infinity III Evaporative Light Scattering Detector (ELSD) is ideal for reproducible, sensitve detection of both volatile and nonvolatile compounds that cannot be detected by UV. A unique peltier cooled evaporator coupled with an original gas flow design allow subambient operation down to 10 °C. This delivers maximum sensitivity for compounds with significant volatility below 30 °C. Novel PMT technology enables an extended dynamic range of four orders of magnitude for trace impurity analysis. This unique design provides excellent sensitivity, reproducibility, and flexibility for a multitude of applications.

1260 Infinity III Multiple Wavelength Detector (G7165A)

The diode array design of the 1260 Infinity III Multiple Wavelength Detector offers very low detector noise (less than ±7 μAU) for precise quantification of trace levels, regardless of the number of signals recorded. Over a wavelength range from 190 to 950 nm, simultaneous detection of up to eight compound-specific wavelengths for optimum selectivity is provided. High-speed UV detection with up to 120 Hz data rates keeps pace with the analysis speed of fast LC.

1260 Infinity III Diode Array Detector HS (G7117C)

The 1260 Infinity III Diode Array Detector HS, with a fixed slit design, is based on the Agilent Max-Light Cartridge Cell with optofluidic waveguides, which improve light transmission to near 100% efficiency without sacrificing resolution caused by cell dispersion effects. With typical detector noise levels of less than ±0.6 µAU/cm, the 60 mm flow cell gives up to 10 times higher sensitivity than detectors with conventional flow cells. Any compromising refractive index and thermal effects are eliminated, resulting in significantly less baseline drift for more reliable and precise peak integration. Multiple wavelength and full spectral detection with up to 120 Hz data rates enable precise identification, quantification, and purity analysis at trace levels for fast LC separations.

1290 Infinity III Diode Array Detector FS (G7117A)

The 1290 Infinity III Diode Array Detector FS (fixed slit) delivers multiple wavelength detection with full spectra at sampling rates up to 120 Hz for fast LC separations. The Max-Light cartridge cell features optofluidic waveguides, which improve light transmission to near 100% efficiency without sacrificing resolution caused by cell dispersions effects. With typical noise levels of ±0.6 µAU/cm, the 60 mm path length flow cell gives up to 10 times higher sensitivity than detectors with conventional flow cells. Any compromising refractive index and thermal effects are almost entirely eliminated, resulting in significantly less baseline drift for more reliable and precise peak integration.

1290 Infinity III Diode Array Detector (G7117B)

The 1290 Infinity III Diode Array Detector FS (fixed slit) delivers multiple wavelength detection with full spectra at sampling rates up to 120 Hz for fast LC separations. The Max-Light cartridge cell features optofluidic waveguides, which improve light transmission to near 100% efficiency without sacrificing resolution caused by cell dispersions effects. With typical noise levels of ±0.6 µAU/cm, the 60 mm path length flow cell gives up to 10 times higher sensitivity than detectors with conventional flow cells. Any compromising refractive index and thermal effects are almost entirely eliminated, resulting in significantly less baseline drift for more reliable and precise peak integration.

1260 Infinity III Diode Array Detector WR (G7115A)

The 1260 Infinity III Diode Array Detector WR offers multiple wavelength and full spectral detection up to a 120 Hz sampling rate. Maximum flexibility is guaranteed with a wide wavelength range of 190 to 950 nm with dual-lamp design, as well as the choice of 15 analytical, preparative, and SFC flow cells. Even at high data rates, the 1260 Infinity III DAD WR enables precise identification, quantification, and peak purity analysis at trace levels.

1260 Infinity III Variable Wavelength Detector (G7114A)

The 1260 Infinity III Variable Wavelength Detector enables highest productivity with fast analysis at up to 120 Hz data rates. Even more sample information can be acquired in dual-wavelength mode. Time-programmable wavelength switching provides optimum sensitivity and selectivity for your applications. Lowest baseline noise and drift results in lowest detection limits for robust quantification of trace level components.

1290 Infinity III Variable Wavelength Detector (G7114B)

The 1290 Infinity III Variable Wavelength Detector enables highest productivity with fast analysis at up to 240 Hz data rates. Even more sample information can be acquired in dual-wavelength mode. Time-programmable wavelength switching provides optimum sensitivity and selectivity for your applications. Lowest baseline noise and drift results in lowest detection limits for robust quantification of trace level components.'

1290 Infinity II Preparative Open-Bed Sampler/Collector (G7158B)

The 1290 Infinity II Preparative Open-Bed Sampler/Collector is the solution for automated, high-capacity management of sample injection and fraction collection in semipreparative and preparative-scale LC purification workflows. The X-Z-theta axis probe uses novel robotic technology to minimize sample carryover during movements between fraction containers. Sample volumes can be injected from microtiter plates, vials, or vessels. The sampler/collector provides for injection of large volumes and sample loops are available with volumes of 2, 5, 10, 20 and 90 mL. The sampler/collector is equipped with an analytical-to-preparative injector and enables easy handling of a wide variety of collection vessels with a total capacity up to 5.9 liters using 150 x 25 mm (l x od) tubes. Optimized for flow rates up to 200 mL/min, the sampler/collector can be integrated seamlessly with any Agilent solvent delivery module, additional fraction collector, recovery collector, or detector.

1260 Infinity III SFC Multisampler (G4767A)

The 1260 Infinity III SFC Multisampler is a high-capacity autosampler for supercritical fluid chromatography, bringing LC-like injection precision and reproducibility to SFC. The wide injection range supports flexible injection volumes from 0.1 to 90 µL without changing sample loops. The 1260 Infinity III SFC Multisampler is compatible with 2 mL vials and well plates for fast, high-throughput (up to 6,144 samples) SFC and SFC/MS applications. Innovative Feed Injection technology pressurizes the sample prior to injection into the carbon dioxide (CO2) stream for utmost injection precision and reproducibility.

1260 Infinity II Prep Autosampler (G7157A)

GLP features. Early maintenance feedback (EMF) for continuous tracking of instrument usage with user-settable limits and feedback messages. Electronic records of maintenance and errors.

1260 Infinity III Bio-Inert Multisampler (G5668A)

The 1260 Infinity III Bio-Inert Multisampler injects samples from microplate and vial at pressures up to 600 bar. It is a compact module offering a capacity of up to 6,144 samples. With its multiwash capability, you can reduce carryover to less than 9 ppm. The metal-free sample flow path makes it the ideal injector for all biorelated applications, including analysis of mAbs, proteins in general, and oligonucleotides. For temperature-sensitive samples, a highly efficient compressor-based thermostatting system can be added. The ceramic needle, PEEK needle seat, and stainless steel-clad PEEK capillaries ensure highest injection accuracy and precision.