1290 Infinity III Bio Online Sample Manager (G3167B)
The 1290 Infinity III Bio Online Sample Manager combines the 1260 Infinity III Online Sample Manager and the 1290 Infinity III Bio Multisampler, offering a biocompatible flow path and a maximum pressure capability of 1300 bar for the most demanding bioprocess monitoring applications.
The Online Sample Manager mediates sample diluent incompatibility in challenging bioprocess samples by supporting both flowthrough and Agilent Feed Injection methods. It automates dilutions up to 1:1000, and offers retain-sample functionality for further analysis. The system also enables direct analysis of process samples and provides automated sample preparation.
1290 Infinity III Diode Array Detector (G7117B)
The 1290 Infinity III Diode Array Detector FS (fixed slit) delivers multiple wavelength detection with full spectra at sampling rates up to 120 Hz for fast LC separations. The Max-Light cartridge cell features optofluidic waveguides, which improve light transmission to near 100% efficiency without sacrificing resolution caused by cell dispersions effects. With typical noise levels of ±0.6 µAU/cm, the 60 mm path length flow cell gives up to 10 times higher sensitivity than detectors with conventional flow cells.
Any compromising refractive index and thermal effects are almost entirely eliminated, resulting in significantly less baseline drift for more reliable and precise peak integration.
1290 Infinity III Diode Array Detector FS (G7117A)
The 1290 Infinity III Diode Array Detector FS (fixed slit) delivers multiple wavelength detection with full spectra at sampling rates up to 120 Hz for fast LC separations. The Max-Light cartridge cell features optofluidic waveguides, which improve light transmission to near 100% efficiency without sacrificing resolution caused by cell dispersions effects. With typical noise levels of ±0.6 µAU/cm, the 60 mm path length flow cell gives up to 10 times higher sensitivity than detectors with conventional flow cells.
Any compromising refractive index and thermal effects are almost entirely eliminated, resulting in significantly less baseline drift for more reliable and precise peak integration.
1290 Infinity III Evaporative Light Scattering Detector (G7102A)
The 1290 Infinity III Evaporative Light Scattering Detector (ELSD) is ideal for reproducible, sensitve detection of both volatile and nonvolatile compounds that cannot be detected by UV. A unique peltier cooled evaporator coupled with an original gas flow design allow subambient operation down to 10 °C. This delivers maximum sensitivity for compounds with significant volatility below 30 °C.
Novel PMT technology enables an extended dynamic range of four orders of magnitude for trace impurity analysis. This unique design provides excellent sensitivity, reproducibility, and flexibility for a multitude of applications.
1290 Infinity III Flexible Pump (G7104A)
The 1290 Infinity III Flexible Pump is a quaternary pump that provides UHPLC gradient formation and solvent blending from up to four solvents. This pump enables quaternary solvent delivery at pressures up to 1300 bar and flow rates up to 5 mL/min.
The 1290 Infinity III Flexible Pump combines highest performance, methods compatibility, and simplified operation with highest flexibility in automated gradient formation and solvent blending. ISET allows you to seamlessly transfer existing methods from different instruments , including current Agilent systems as well as instruments from other manufacturers.
1290 Infinity III High-Speed Pump (G7120A)
The 1290 Infinity III High Speed Pump uses high-pressure mixing for UHPLC gradient formation and solvent blending from up to two solvents at pressures up to 1300 bar and flow rates up to 5 mL/min.
The 1290 Infinity III High Speed Pump has an exceptionally low delay volume, which allows you to run ultrafast gradients for narrow-bore UHPLC applications. This capability makes this pump the ideal front-end for LC/MS applications. The full ISET range allows you to seamlessly transfer existing methods from different instruments, including current Agilent systems as well as instruments from other manufacturers.
1290 Infinity III Multicolumn Thermostat (G7116B)
The 1290 Infinity III Multicolumn Thermostat (MCT) is a UHPLC column oven that provides precise temperature control over a broad temperature range with cooling to 20 degrees below ambient and heating up to 110 °C. The MCT's column compartment houses up to eight columns.
High-pressure valves rated at 1300 bar enable a wide range of applications such as automatic selection from eight columns, sample preparation for analyte enrichment or matrix removal, or alternating column regeneration. The 1290 Infinity III MCT fits perfectly in any InfinityLab LC Series system and can also be combined with earlier 1260 and 1290 Infinity Series modules.
1290 Infinity III Refractive Index Detector (G7162B)
The 1290 Infinity III Refractive Index Detector (RID) is a UHPLC RID detector that provides excellent sensitivity, resolution, and sample throughput for UHPLC DRI experiments. The 1290 Infinity III RID is a equipped with an ultralow dispersion microflow cell and a data rate of 148 Hz, which significantly reduces run times for higher sample throughput and improved resolution and sensitivity.
1290 Infinity III Variable Wavelength Detector (G7114B)
The 1290 Infinity III Variable Wavelength Detector enables highest productivity with fast analysis at up to 240 Hz data rates. Even more sample information can be acquired in dual-wavelength mode. Time-programmable wavelength switching provides optimum sensitivity and selectivity for your applications.
Lowest baseline noise and drift results in lowest detection limits for robust quantification of trace level components.'
1290 Infinity III Vialsampler (G7129B)
The 1290 Infinity III Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 1300 bar.
Options and upgrades are available for sample cooling and heating from 4 to 40 °C. An integrated column compartment is also available as an option or upgrade and provides thermal control to 80 °C for two columns.
190047900 Digestion tubes, 50 mL
Digestion tubes, 50 mL, with threaded, natural linerless cap, 500/pk. All polypropylene suitable for digestion with 36 and 54-well block digestors. Certified for low leachable metal content. Tube has 5 mL graduations to 50 mL, certified for volume accuracy to 0.5 %. Dimensions: 30 mm od x 110 mm H with tapered body, wide neck, and flat base for added stability. Supplied with CoA confirming low leachable metals content and volume accuracy.
















