Showing 1–17 of 100 results

1260 Infinity II Analytical Fraction Collector (G1364F)

The 1260 Infinity II Analytical-Scale Fraction Collector is optimized for laboratories performing analytical-scale compound purification of nanogram to milligram quantities with typical flow rates between 0.1 and 10 mL/min. The module features the full set of collection modes and is compatible with a wide variety of trigger sources. SBS plates and four different tube sizes with various lenghts are supported. The Analytical-Scale Fraction Collector features a compact closed-box design, requires minimal bench space, and can be seamlessly integrated into any InfinityLab Analytical System. The built-in fraction delay sensor allows automated delay calibration for maximum substance recovery, and the four preconfigured capillary kits ensure minimum peak dispersion for maximum purity. Maximum capacity can be easily enhanced by clustering up to three modules.

1260 Infinity II Analytical-Scale LC Purification System

Agilent offers high- and ultrahigh-performance LC systems customized for applications from routine analysis to specialized workflow solutions. Our preparative HPLC systems provide superior sample purification with excellent recovery.  

1260 Infinity II Bio-inert Fraction Collector (G5664B)

The 1260 Infinity II Bio-Inert Fraction Collector is the ideal extension to your system when you need to further investigate separated compounds. A wide range of collection vessels, including vials, microplates, or custom vessels, provide highest collection flexibility. Handling flow rates up to 10 mL/min, even separations using columns with larger inside diameters for small-scale preparative applications are possible. This fraction collector fits perfectly into the Agilent modular LC design and does not require extra bench space. Patented fraction delay calibration and time- or peak-triggered fraction collection facilitates superior recovery and purity. An additional cooling module is available to prevent degradation of thermally labile biomolecules.
For Research Use Only. Not for use in diagnostic procedures.

1260 Infinity II Column Organizer (G9328A)

The 1260 Infinity II Preparative Column Organizer is a support module for purification workflows. It provides convenient and stable mounting of a manual injector and easily organizes both analytical and preparative columns from 4.6 to 50 mm inner diameter. This compact module can be easily attached to any InfinityLab LC Purification System, saving valuable bench space in your laboratory. It provides a leak sensor for additional safety during operation and is flexibly designed to support any purification workflow with column lengths from 50 to 250 mm.

1260 Infinity II Prep Autosampler (G7157A)

GLP features. Early maintenance feedback (EMF) for continuous tracking of instrument usage with user-settable limits and feedback messages. Electronic records of maintenance and errors.

1260 Infinity II Preparative Binary Pump (G7161A)

The 1260 Infinity II Preparative Binary Pump is an affordable high-pressure gradient pump for LC purification. The pump offers a dynamic flow rate range from 1 to 50 mL/min at up to 420 bar, allowing workflows on columns from 9.4 to 30 mm inner diameter. This versatile pump is engineered for continuous use and provides reliable and rugged performance through a dual-piston, rapid-refill design. It offers automated seal wash for increased seal lifetime plus outstanding retention time stability, and is ideally suited for daily operation within a broad range of semipreparative applications.

1260 Infinity II Preparative Fraction Collector (G1364E)

The 1260 Infinity II Preparative Fraction Collector is optimized for laboratories performing semipreparative-scale purification of milligram to low gram quantities with typical flow rates between 4 and 100 mL/min. The module features the full set of collection modes and is compatible with a wide variety of trigger sources. SBS plates and four different tube sizes with various lengths are supported. The Preparative-Scale Fraction Collector features a compact closed-box design, requires minimal bench space, and can be seamlessly integrated into any InfinityLab Purification System. The built-in fraction delay sensor allows automated delay calibration for maximum substance recovery, and the four preconfigured capillary kits ensure minimum peak dispersion for maximum purity. Maximum capacity can be easily enhanced by clustering up to three modules.

1260 Infinity II Valve-Based Fraction Collector (G7166A)

The 1260 Infinity II Preparative Valve-Based Fraction Collector is a compact, full-featured fraction collector for daily compound isolation and purification by LC. Optimized for collection of up to 11 high-volume fractions its versatile design allows operation in both routine sample purification workflows and recovery applications. The built-in fraction delay sensor allows precise and automatic calibration of the fraction collector for accurate sample collection. This fraction collector accepts multiple detectors as trigger sources and includes all standard collection modes like time-based and peak-based. It can be used on any InfinityLab Purification System and its small dimensions occupy virtually no additonal space on the instrument. Blow-outs of nitrogen or compressed air purge the outlet lines after completed collection and help minimize carryover.

1260 Infinity III Fluorescence Detector (G7121A)

The 1260 Infinity III Fluorescence Detector offers time-programmable excitation and emission wavelength switching. The proven optical and electronic design provides the highest sensitivity for the analysis of trace-level components. This detector can be used with any Agilent InfinityLab LC Series system or other LC instrument. Benefit from highest sensitivity for the analysis of trace-level components featuring high-speed detection with up to 74 Hz data rates for narrow LC peaks.

1260 Infinity III Fluorescence Detector Spectra (G7121B)

The 1260 Infinity III Fluorescence Detector Spectra is a sensitive HPLC fluorescence detector that simultaneously provides quantitative data and fluorescence spectra from a single run, enabling rapid method optimization for HPLC FLD Detector Spectra experiments. Use the online spectral information for rapid method optimization and verification of separation quality. High-speed detection features up to 148 Hz data rates for very narrow peaks. This detector can be used with any Agilent InfinityLab LC Series system or other LC instrument.

1260 Infinity III Multisampler (G7167A)

The 1260 Infinity III Multisampler is a multipurpose autosampler that handles vials and microplates. Injecting at pressures up to 600 or 800 bar, the Multisampler is a compact module with a capacity of up to 6,144 samples, all within the footprint of an Agilent LC stack. The 1260 Infinity III Multisampler is optimized for highest flexibility. The unique dual-needle design enables cycle times to be reduced by overlapping sample runs and injection cycles. The multiwash capability reduces carryover to less than 9 ppm.

1260 Infinity III Binary Pump (G7112B)

The 1260 Infinity III Binary Pump uses high-pressure mixing for UHPLC gradient formation and solvent blending from one or two solvents at pressures up to 600 bar and flow rates up to 5 mL/min. The 1260 Infinity III Binary Pump is ideally suited for a broad range of UHPLC applications using columns with conventional, superficially porous or sub-2-micron particles. This pump delivers reproducible gradients for routine HPLC or UHPLC applications with UV or MS detection where speed, resolution, and uncompromised data quality are essential.

1260 Infinity III Bio Flexible Pump (G7131C)

The 1260 Infinity III Bio Flexible Pump is a UHPLC pump comprising biocompatible components, developed for biopharma applications and for other analyses requiring high-salt and extreme-pH conditions. This pump enables quaternary solvent delivery at pressures up to 800 bar and flow rates up to 5 mL/min. The 1260 Infinity III Bio Flexible Pump combines high performance and simplified operation with remarkable flexibility in automated gradient formation and solvent blending. This pump also facilitates seamless method transfer using Intelligent System Emulation Technology (ISET) and automated buffer blending.
 

1260 Infinity III Bio-Inert Multisampler (G5668A)

The 1260 Infinity III Bio-Inert Multisampler injects samples from microplate and vial at pressures up to 600 bar. It is a compact module offering a capacity of up to 6,144 samples. With its multiwash capability, you can reduce carryover to less than 9 ppm. The metal-free sample flow path makes it the ideal injector for all biorelated applications, including analysis of mAbs, proteins in general, and oligonucleotides. For temperature-sensitive samples, a highly efficient compressor-based thermostatting system can be added. The ceramic needle, PEEK needle seat, and stainless steel-clad PEEK capillaries ensure highest injection accuracy and precision.

1260 Infinity III Bio-Inert Pump (G5654A)

The 1260 Infinity III Bio-Inert Pump is a quaternary UHPLC pump that is made of bio-inert material for use in biological and extreme pH applications. This pump enables gradient formation and solvent blending from up to four solvents and operates at pressures up to 600 bar and flow rates up to 10 mL/min. The 1260 Infinity III Bio-Inert Pump is resistant to corrosion by high salt concentrations (2 M) and can handle a wide pH range from 1–13, and even up to pH 14 for short-term use. This pump is ideal for protein and NBE characterization.

1260 Infinity III Diode Array Detector HS (G7117C)

The 1260 Infinity III Diode Array Detector HS, with a fixed slit design, is based on the Agilent Max-Light Cartridge Cell with optofluidic waveguides, which improve light transmission to near 100% efficiency without sacrificing resolution caused by cell dispersion effects. With typical detector noise levels of less than ±0.6 µAU/cm, the 60 mm flow cell gives up to 10 times higher sensitivity than detectors with conventional flow cells. Any compromising refractive index and thermal effects are eliminated, resulting in significantly less baseline drift for more reliable and precise peak integration. Multiple wavelength and full spectral detection with up to 120 Hz data rates enable precise identification, quantification, and purity analysis at trace levels for fast LC separations.