Showing 35–51 of 102 results

InfinityLab Assist Hub (G7180A)

InfinityLab Assist Upgrade. This upgrade includes a hub with user interface, and control software for 1260 and 1290 Infinity II/III HPLC and UHPLC systems. It offers local, real-time control, guided maintenance, and troubleshooting tips, reducing operator time and errors. Automated workflows and real-time dashboards simplify HPLC routine tasks, ensuring seamless operations. Accessible onboard or remotely, it allows users to focus on enhancing HPLC results. Bundled services and one year of warranty are included.

1260 Infinity II Valve-Based Fraction Collector (G7166A)

The 1260 Infinity II Preparative Valve-Based Fraction Collector is a compact, full-featured fraction collector for daily compound isolation and purification by LC. Optimized for collection of up to 11 high-volume fractions its versatile design allows operation in both routine sample purification workflows and recovery applications. The built-in fraction delay sensor allows precise and automatic calibration of the fraction collector for accurate sample collection. This fraction collector accepts multiple detectors as trigger sources and includes all standard collection modes like time-based and peak-based. It can be used on any InfinityLab Purification System and its small dimensions occupy virtually no additonal space on the instrument. Blow-outs of nitrogen or compressed air purge the outlet lines after completed collection and help minimize carryover.

1290 Infinity II Preparative Open-Bed Fraction Collector (G7159B)

The 1290 Infinity II Preparative Open-Bed Fraction Collector is our most versatile fraction collector, enabling high-capacity fraction collection of purified compounds for semipreparative and preparative-scale LC purification. This module is ideally suited to open-access environments, provides all standard trigger modes for purification workflows, and is optimized for flow rates up to 200 mL/min. The Open-Bed Fraction Collector can be seamlessly integrated into any InfinityLab Purification System. The integrated fraction delay sensor allows automated delay calibration for maximum substance recovery. The module uses RFID tagging for automated and rapid detection of vessel dimensions. The fast X-Z-theta probe minimizes sample loss during movement between vessels.

1260 Infinity II Bio-inert Fraction Collector (G5664B)

The 1260 Infinity II Bio-Inert Fraction Collector is the ideal extension to your system when you need to further investigate separated compounds. A wide range of collection vessels, including vials, microplates, or custom vessels, provide highest collection flexibility. Handling flow rates up to 10 mL/min, even separations using columns with larger inside diameters for small-scale preparative applications are possible. This fraction collector fits perfectly into the Agilent modular LC design and does not require extra bench space. Patented fraction delay calibration and time- or peak-triggered fraction collection facilitates superior recovery and purity. An additional cooling module is available to prevent degradation of thermally labile biomolecules.
For Research Use Only. Not for use in diagnostic procedures.

1260 Infinity II Analytical Fraction Collector (G1364F)

The 1260 Infinity II Analytical-Scale Fraction Collector is optimized for laboratories performing analytical-scale compound purification of nanogram to milligram quantities with typical flow rates between 0.1 and 10 mL/min. The module features the full set of collection modes and is compatible with a wide variety of trigger sources. SBS plates and four different tube sizes with various lenghts are supported. The Analytical-Scale Fraction Collector features a compact closed-box design, requires minimal bench space, and can be seamlessly integrated into any InfinityLab Analytical System. The built-in fraction delay sensor allows automated delay calibration for maximum substance recovery, and the four preconfigured capillary kits ensure minimum peak dispersion for maximum purity. Maximum capacity can be easily enhanced by clustering up to three modules.

1260 Infinity II Preparative Fraction Collector (G1364E)

The 1260 Infinity II Preparative Fraction Collector is optimized for laboratories performing semipreparative-scale purification of milligram to low gram quantities with typical flow rates between 4 and 100 mL/min. The module features the full set of collection modes and is compatible with a wide variety of trigger sources. SBS plates and four different tube sizes with various lengths are supported. The Preparative-Scale Fraction Collector features a compact closed-box design, requires minimal bench space, and can be seamlessly integrated into any InfinityLab Purification System. The built-in fraction delay sensor allows automated delay calibration for maximum substance recovery, and the four preconfigured capillary kits ensure minimum peak dispersion for maximum purity. Maximum capacity can be easily enhanced by clustering up to three modules.

1260 Infinity III Multicolumn Thermostat (G7116A)

The 1260 Infinity III Multicolumn Thermostat (MCT) is a thermostatted HPLC column compartment that provides precise temperature control for up to four columns over a broad temperature range with cooling to 10 degrees below ambient and heating up to 85 °C. High-pressure valves rated at 800 bar enable a wide range of applications such as automatic selection of up to four columns, sample preparation for analyte enrichment or matrix removal, or alternating column regeneration. The 1260 Infinity III MCT fits perfectly in any InfinityLab LC Series system and can also be combined with earlier 1260 and 1290 Infinity Series modules.

1290 Infinity III Multicolumn Thermostat (G7116B)

The 1290 Infinity III Multicolumn Thermostat (MCT) is a UHPLC column oven that provides precise temperature control over a broad temperature range with cooling to 20 degrees below ambient and heating up to 110 °C. The MCT's column compartment houses up to eight columns. High-pressure valves rated at 1300 bar enable a wide range of applications such as automatic selection from eight columns, sample preparation for analyte enrichment or matrix removal, or alternating column regeneration. The 1290 Infinity III MCT fits perfectly in any InfinityLab LC Series system and can also be combined with earlier 1260 and 1290 Infinity Series modules.

1260 Infinity III Evaporative Light Scattering Detector (G4260B)

The 1260 Infinity III Evaporative Light Scattering Detector (ELSD), although targeted at analytical scale, can also be used with a flow splitter for preparative chromatography applications. It is highly recommended for compounds with little or no UV chromophore, since the detector technique evaporates the solvent and then measures the intensity of the scattered light, which is directly proportional to the sample concentration. There is no need to make any corrections for composition: the response is independent of any optical properties. Whatever temperature and gas flow rate is selected, the detector rapidly stabilizes and can be used within minutes. There is no baseline drift to consider, baseline integration is straightforward, and reproducibility is excellent. The detector can be programmed and controlled by many available LC software packages.

1260 Infinity III Refractive Index Detector (G7162A)

The 1260 Infinity III RID is an HPLC refractive index detector (RID) detector that provides excellent performance for entry-level UHPLC and HPLC differential refractometer (DRI) experiments. Rapid equilibration times and stable baselines make it easy to analyze carbohydrates, triglycerides, organic acids, and pharmaceutical excipients. The 1260 Infinity III RID is the detector of choice for polymer characterization using gel permeation chromatography (GPC) and size exclusion chromatography (SEC).

1290 Infinity III Refractive Index Detector (G7162B)

The 1290 Infinity III Refractive Index Detector (RID) is a UHPLC RID detector that provides excellent sensitivity, resolution, and sample throughput for UHPLC DRI experiments. The 1290 Infinity III RID is a equipped with an ultralow dispersion microflow cell and a data rate of 148 Hz, which significantly reduces run times for higher sample throughput and improved resolution and sensitivity.

1260 Infinity III Fluorescence Detector Spectra (G7121B)

The 1260 Infinity III Fluorescence Detector Spectra is a sensitive HPLC fluorescence detector that simultaneously provides quantitative data and fluorescence spectra from a single run, enabling rapid method optimization for HPLC FLD Detector Spectra experiments. Use the online spectral information for rapid method optimization and verification of separation quality. High-speed detection features up to 148 Hz data rates for very narrow peaks. This detector can be used with any Agilent InfinityLab LC Series system or other LC instrument.

1290 Infinity III Evaporative Light Scattering Detector (G7102A)

The 1290 Infinity III Evaporative Light Scattering Detector (ELSD) is ideal for reproducible, sensitve detection of both volatile and nonvolatile compounds that cannot be detected by UV. A unique peltier cooled evaporator coupled with an original gas flow design allow subambient operation down to 10 °C. This delivers maximum sensitivity for compounds with significant volatility below 30 °C. Novel PMT technology enables an extended dynamic range of four orders of magnitude for trace impurity analysis. This unique design provides excellent sensitivity, reproducibility, and flexibility for a multitude of applications.

1260 Infinity III Multiple Wavelength Detector (G7165A)

The diode array design of the 1260 Infinity III Multiple Wavelength Detector offers very low detector noise (less than ±7 μAU) for precise quantification of trace levels, regardless of the number of signals recorded. Over a wavelength range from 190 to 950 nm, simultaneous detection of up to eight compound-specific wavelengths for optimum selectivity is provided. High-speed UV detection with up to 120 Hz data rates keeps pace with the analysis speed of fast LC.

1260 Infinity III Diode Array Detector HS (G7117C)

The 1260 Infinity III Diode Array Detector HS, with a fixed slit design, is based on the Agilent Max-Light Cartridge Cell with optofluidic waveguides, which improve light transmission to near 100% efficiency without sacrificing resolution caused by cell dispersion effects. With typical detector noise levels of less than ±0.6 µAU/cm, the 60 mm flow cell gives up to 10 times higher sensitivity than detectors with conventional flow cells. Any compromising refractive index and thermal effects are eliminated, resulting in significantly less baseline drift for more reliable and precise peak integration. Multiple wavelength and full spectral detection with up to 120 Hz data rates enable precise identification, quantification, and purity analysis at trace levels for fast LC separations.

1290 Infinity III Diode Array Detector FS (G7117A)

The 1290 Infinity III Diode Array Detector FS (fixed slit) delivers multiple wavelength detection with full spectra at sampling rates up to 120 Hz for fast LC separations. The Max-Light cartridge cell features optofluidic waveguides, which improve light transmission to near 100% efficiency without sacrificing resolution caused by cell dispersions effects. With typical noise levels of ±0.6 µAU/cm, the 60 mm path length flow cell gives up to 10 times higher sensitivity than detectors with conventional flow cells. Any compromising refractive index and thermal effects are almost entirely eliminated, resulting in significantly less baseline drift for more reliable and precise peak integration.