Showing 86–102 of 496 results

Air Sampler 1000 Series (1000-3000 ml/min)

Small in size, simple to use and easy to operate, the Particles Plus® Air Sampler 1000 Series is ideal for personal sampling applications. Only weighing 0.70 lbs which provides a flow range between 1000 - 3000 ml/min. The 1000 Series allows for constant flow correction even with changes in ambient temperature and barometric pressure through our ultra-quiet rotary vane vacuum pump technology. The easy to read LED display provides accumulated sampling volume and a battery conservation mode after 30 seconds of idle use allowing for over 30+ hours of continuous sampling. The power switch allows for easy operation including Continuous Sampling, Volume Reset, and Battery Conservation Mode, with the push of a button.

2301P and 2501P Remote Airborne Particle Counters 0.1 CFM (2.83 LPM)

The 2301P and 2501P particle counters provide a range of particle size measurement from 0.3 to 25.0 μm at 0.1 CFM (2.83 LPM) flow. These sensors allow for efficient particle counting with high accuracy and resolution that meet or exceed ISO 21501-4 and JIS B9921 for the calibration of a particle counter. These units are equipped with an internal pump and manifold and do not require an external vacuum source. Integration into a building automation or facility monitoring system is easy via standard MODBUS RS-485 communication.

Titration

Metrohm portfolio of titrators includes affordable, compact, and stand-alone options as well as modern and fully automated systems.

888 Titrando with OMNIS SW

High-end titrator with built-in buret drive includes:
  • OMNIS standalone license, 801 Stirrer magnetic stirrer, 20 mL exchange unit and combined "Ecotrode plus" pH glass electrode
  • Dynamic (DET), monotone (MET), end point titration (SET), Karl-Fischer Titration (KFT)
  • Four MSB connectors
  • Optional second buret for titration
  • A galvanically isolated measuring interface (also for intelligent electrodes "iTrodes")
  • USB connector

Eco Titrator

The compact Eco Titrator with integrated magnetic stirrer and touch-sensitive user interface is ideal for routine analysis. It provides GLP-compliant results with minimum space requirements at all times (approx. DIN A4). Universally compatible with almost all potentiometric titrations, such as, for example, for
  • Food products: Acid content, chloride, Vitamin C, iodine and peroxide number in fats
  • Water analysis: Carbonate and Ca/Mg hardness, chloride, sulfate, permanganate index
  • Petrochemistry: Acid/base number, sulfide & mercaptans, chloride, bromine number
  • Electroplating: Total acid, metal content, chloride
  • Surfactant analysis: Anionic, cationic and non-ionic surfactants
Photometry with the Optrode: p and m value, metals, water hardness

800 Dosino

Drive with write/read hardware for intelligent dosing units. With permanently attached cable (length 0.65 m).

Karl Fisher Titrator

KF titrators and accessories for volumetric and coulometric water content determination in liquid, solid, or gaseous samples.

Eco KF Titrator

The new Eco KF Titrator with integrated magnetic stirrer und touch-sensitive display is ideal for routine water content determination. Predefined methods enable a smooth and easy instrument start-up. In addition to GLP-compliant printouts on paper or as PDFs, the Eco KF Titrator also offers the option of connecting balances or of sending the determination data to a PC via PC / LIMS reports.

874 Oven Sample Processor

The 874 Oven Sample Processor is used for automatic thermal sample preparation in Karl Fischer titration. The oven method is particularly suitable for samples that do not release their water until higher temperatures have been reached, for sparingly soluble samples, or those that react with the KF reagent

Sample beaker, plastic (PE), 75 mL, 144 pieces

Sample beaker, plastic (polyethylene, PE) 75 mL, suitable for sample racks: 6.2041.340, 6.2041.350, and 6.2041.800, suitable for 6.02041.040 OMNIS Software sample rack, 144 pieces.

Ion Chromatograph

Ion chromatography instruments for routine use and research applications: flexible, reliable, and easy to use.

ProfIC Vario 15 AnCat

The Professional IC Vario system with Metrohm's intelligent Partial Loop Injection Technique, sequential suppression, and conductivity detection enables fully automated determination of anions and cations. "Partial Loop Injection" enables the injection of various sample volumes. Typical areas of application:
  • Universal use for all types of samples
  • From trace analysis to waste water analysis
  • Great differences in concentration in a single sample series

Eco IC Package

The automated introductory model for water analysis and teaching. The IC Eco Package can be retrofitted with Inline Ultrafiltration at any time. The scope of delivery includes the Eco IC, the 863 Compact IC Autosampler, the conductivity detector, the Metrohm Suppressor Module ("MSM") and the MagIC Net Basic software.

3710026400 Silicon tubing

Silicon tubing, 1 mm id, 3 mm od. Used for connecting nebulizer capillary to SPS probe line

2410020500 Nebulizer capillary tubing

Tubing, capillary, nebulizer, for ketone-based organic samples, per m